Cyc Flood
Type set at wdth 109 by its own beam angle
Every figure on this page is read from HF-CYC.ldt — the photometric file this house already publishes for download. Nothing here is typed by hand.
Asymmetric on purpose: the peak sits about forty degrees off nadir so the top of the cloth gets as much light as the bottom. Both of its 50% crossings are therefore on the same side of straight down — at -5 and +88 degrees — which is why the beam angle is 83 and not the 137 you get by measuring outward from nadir in both directions.
HF-CYC.ldt is read, and every figure on this page is already computed from it. The room is next.
The section, at C0–C180 and C90–C270
The two planes disagree by 64.3°, which is what asymmetric means. There is no single beam angle for this fixture; the catalogue quotes C0–C180.
From the file
| Format | EULUMDAT |
|---|---|
| Photometry | Type C |
| V·angles | 37 |
| H·angles | 24 · none |
| Resolution | 2.50° |
| Test | HF-GONIO-0140 |
| Opening | 0.180 × 0.320 m |
| Downward flux | 100.0 % |
Reconciled at build
- Luminous flux
- declared17000 lmmeasured16800.0 lmΔ (tol. ±3 %)−1.18 %
- Beam angle, 50%
- declared83.0°measured82.8°Δ (tol. ±1.0°)−0.24°
- Field angle, 10%
- declared159.0°measured159.2°Δ (tol. ±1.5°)+0.19°
The build refuses this page if any of those exceed the tolerance beside it. Run pnpm check:photometry to see it happen.
The file itself
Zonal lumens
Integrated from the file in ten-degree bands. They sum to 16800.0 lm, which is the same integral the reconciliation above compares against the catalogue.
Variants
| Order code | CCT | CRI | Finish |
|---|---|---|---|
| HF-CYC/TU | 3200 K | 96 Ra | Open white — tungsten |
| HF-CYC/DA | 5600 K | 94 Ra | Open white — daylight |
| HF-CYC/CT | 4300 K | 92 Ra | Half CTB |
Housing finishes: Black. Housing depth 0.280 m.